Game Contents

Assembly Instructions

Take a moment to check the contents of the game.
Next think about what side of the table the dealer
would be on, and what end the dice would be thrown
from (usually the end you brake from on the pool table)

1. Locate the dealer side on the felt (top center) center
and smooth out the felt on the table.
(figure  #1)



2. Position the 5 inch barrier around the table.  (Save
and store the 5 inch clamps in the box to use at  a  
later  time)


3. Center the ends in the middle of the dealer side.
(figure  #2)


Optional Backstop For Craps


To install the optional backstop you will take one end
(the end that the dice bank off of) and straighten it
out.  Start the bottom corner of the backstop radius
into the top half of the barrier radius.
(figure #3)







By pushing and pulling, the backstop will slide
together. Both the barriers and the back stop should
be straight.
(figure  #4)





Center the backstop between pockets or corners.  
Take  the  end  of the barrier back to the dealer
position and slide bottom radius together one inside
the other, and push it in 6 inches.
(figure  #5)


Raise  the  top  lip of the barrier up and over each
other.
(figure  #6)

If there is a bulge in the center of the overlap,
massage the bulge from center to top and bottom of
the barrier.

Fine Tunning the Barrier

If the sides are lying over the barrier it is to long.  If
the barrier is not tight up against the ends of the table,
it is way to short.  You will need to find a happy
medium.  To make longer or shorter do not fight the
barrier, simply roll the outer radius over the inter
radius at the top of the splice then push or pull the
bottom half in or out.  Then roll the top back over each
other.
Fine tunning the barrier and centering the backstop
will make a big difference to the over all look of the
game.
(figure #7)

The game kit is also designed to be used on smaller
tables, such as  ping-pong, folding,  kitchen tables or
any flat surface.  Use the 5 inch packing clamps, and
overlap the barrier.  But DO NOT splice together,
simply use the 5 inch clamps.  The barriers will be side
by side.
(figure  #8)

Packing Up the Game

1. When finished undo the barrier and remove the
backstop.
2. Place the 5 inch clamps in the middle of the table.
3. Roll up the barrier (do not raise it up off the table
just roll it up in it’s playing position.  Do not kink it
roll it up. Once rolled up, put the  5 inch  clamps on
both ends. Flatten the tops with the palm of your
hand.
(figure  #9)

4. Place rake in the box from corner to corner
5. Next place the rolled up barrier in the box.
6. Now the back stop goes in (the short side goes up
meaning the top remains the top.
(figure #10)

7. Finish packing the rest of the kit.
Assembly
That's it! After following the easy instructions you are ready to use your gaming kit. After taking a few minutes
to review the rules of Craps and Black Jack, you'll be ready to go. In no time at all you will be entertaining
family and friends.

Please remember that the shipping carton is designed to store your game for future use. When finished
playing rewind the barrier, fold the mat and return all miscellaneous game parts to the plastic bag. Storage in
the original carton will ensure all game components are available the next time you are ready to play.

Have fun with Suddenly Las Vegas!
U.S. PATENT 5971861     2001 COPYRIGHTS     SUDDENLYLASVEGAS.COM
Figure #1
Click picture for a sketched view
Figure #2
Click picture for a sketched view
Figure #3
Click picture for a sketched view
Figure #4
Click picture for a sketched view
Figure #5
Click picture for a sketched view
Figure #6
Click picture for a sketched view
Figure #7
Click picture for a sketched view
Figure #8
Click picture for a sketched view
Figure #9
Click picture for a sketched view
Figure #10
Click picture for a sketched view